16
WHEEL CHANGE (97mm to AT)
FRONT TRUCK
1.
Take your Skate Tool included in the box and remove the
Axle Nut and Speed Ring (spacer) that is securing the wheel
to the truck.
2.
Slide the Wheel off the Truck, a Second Speed Ring will be
on the inner part between the Wheel and Truck. Be sure not to
lose this.
3.
Pull off the Wheel keeping in mind that there will also be
another Speed Ring on the other side of the Wheel
If the Second Speed Ring comes off, place the Second Speed
Ring back onto the Axle.
4.
Make sure you have bearings inserted into the wheel you
are placing on the board and that the middle spacer is posi-
tioned correctly so you can insert the Axle Through the wheel
and bearings.
5.
Next place the AT tire on the Truck and then add the loose
Speed Ring. Screw the Nut on being sure not to over tight-
en the Nut. The outboard side of the tire has an arrow that
shows the drive direction. Make sure they are pointed to-
wards the front of the truck and the Schrader Valve is facing
outward away from the board.
6.
Repeat steps 1 - 5 on the other side of the Front Truck.
wheel change
PRO
Summary of Contents for SEX PANTHER
Page 1: ...1 ...
Page 7: ...7 charging charged ...
Page 26: ...26 FOR CUSTOMER SUPPORT VISIT MILESBOARD ZENDESK COM ...