Miles SEX PANTHER, Manual

Page: 17 / 26

17
REAR TRUCK
7. Remove Axle Nut and Speed Ring securing the Wheel.
8. While holding the Wheel Pulley, with the other hand, slide
the Wheel off.
9. Once the belt is removed, use a Metric Allen Key Set to loos-
en the Motor Bolts.
10. Move the Motor outwards, all the way back.
11. Take the AT Pulley and Tire and insert the pulley into the
Tire being sure it is fully inserted.
12. Place the AT Belt over the Motor Pulley and Axle.
13. Place the AT Wheel w/ Wheel Pulley onto the Axle.
14. Once the AT Wheel is on, wrap the belt around the Motor
Pulley and Wheel Pulley.
Gently rotate the wheel to get the belt and the pulley to line up.
15. Pull the Motor back to increase the Belt Tension.
16. Hold this tension as you tighten down the Motor Bolts to
secure everything.
17. Once done, place the Speed Ring and Axle Nut back on and
tighten down.
18. Repeat steps 7 - 17 with the other side of the rear truck.