38
Connect Gas Line and Test Appliance
Connect the gas line to the burner module. Check
for leaks, purge the line, and test-fi re the unit before
installing the window or proceeding with the remainder
of the installation—see section
Lighting Instructions
.
Re-install Log Support
Re-install Firebox Top Baffl
e (if removed)
Installation
Install Top Convection Baffl
e
Position the fi rebox as far back as possible
within the
existing fi replace to allow ample space at front for the
fret, if used, and to allow convection air to fl ow under the
smoke curtain of the existing fi replace.
Slide the convection baffl e into the clips located
underneath top of appliance.
Underside view
Clip convection baffl e
to fi rebox
Edge fi ts into
cleat at back
RF24JD-CL
shown;
same for CA
QUALIFIED
INSTALLER
