Milenta Ultimo Plus FP14201A, Instruction Manual

Page: 4 / 36

4
Instructions Manual
Built-in safety lock
This function ensures that user can only switch the appliance on when the accessories have been
placed on the unit in correct position. When the accessories have been fixed properly, the unit can
only be switched on. (i.e. Built-in safety lock function is disabled at this moment)
Use the appliance
To use your food processor
1.Fit the processor bowl onto the main unit and
place the handle towards the back.
2. Place the processor drive shaft onto the
motor drive shaft.
3. Then fit the suitable disk or blade onto the
processor drive shaft.
Caution: Always fit the bowl and attachment onto
the appliance before adding ingredients.
4. Fit the lid and turn clockwise until it locks -
ensuring the top of the drive shaft locates into
the centre of the lid.
5. Turn the processor bowl clockwise until it
locks.
Caution: Do not use the lid to operate the processor,
always use the on/off speed control. The processor
won’t work if the bowl and lid are fitted incorrectly.
Use the pulse control for short bursts. The
pulse will operate for as long as the lever is
held down.
6. Switch on and select a speed.
7. Reverse the above procedure to remove the
lid, attachments and bowl.
Attention: To remove the lid from the processor
bowl, the processor bowl must be unlocked
from main unit first.
Caution: Always switch off before removing the lid.
Important
Your processor is not suitable for crushing or
grinding coffee beans, or converting granulated
sugar to caster sugar.
1
5
2
3
4