MIKROTRON GmbH / EoSens 3CL
/
CAMMC301x-RG / 2020
3-34
ASCII commands instruction set
Reset the internal FPGA
Command
:B
Response:
'OK' or 'ERROR: xx message'
3.10.4 Reset the internal FPGA
The command
:c
resets the camera. The FPGA will be reconfigured
and all internal registers reloaded with the last saved power-up pro
-
file. The FPGA is also configured after each power-up.
Command
:c
Response:
ACK / NAK (if :A is set to Y)
3.10.5 Acknowledge flag
This command switches the acknowledge response on or off. If set
to on, every write command returns an ACK (0x06) if the command
was processed successfully or NAK (0x15) if the command failed to
execute.
Command
:A<x>
Parameters: y/Y for ON, n/N for OFF
Response:
ACK / NAK (if :A is set to Y)
Command
:A?
actual setting
3.10.6 Setting the baud rate
NOTE
After a reset or power-up, the camera always starts
with the default baud rate of 9600.
The command :b sets the baud rate for the camera control commu
-
nication.
