Mi
Home
™
11
Single Pole Relay
MiHO0 14 Single Pole Relay
Fitting and Wiring Instructions
1) Before commencing work, isolate the mains power supply and remove the fuse in the fuse box or switch oǺ the circuit breaker in
the consumer unit.
2) Connect the wires as shown in the wiring diagram attached. Ensure the cables are stripped to an appropriate length of between
6mm and 10 mm. Ensure the cables are fully inserted into the
terminals and that the terminals are properly tightened and no bare wire is visible.
3) Screw the unit to a suitable ï at vertical surface at least 40 0 mm above the adjacent ï oor.
4) This product must be installed in accordance with the latest Building and IET Wiring
Regulations by a suitable competent person. If in any doubt, please contact a qualiî ed electrician.
For indoor use only