23
TOOL MAINTENANCE
1.
Inspect bolts periodically. If the bolts loosen,
tighten them immediately, or will result in
serious accident.
2.
Inspect tool cords periodically. If damaged,
have repaired at your nearest Authorized
m7
Service Center.
3.
Keep the vents clean. Clean all parts of
the tool, clean dust periodically. To prevent
debris from entry.
4.
All service MUST only be performed by
Authorized
m7
Service Center. ALWAYS
use only accessories that are recommended
for this tool.
5.
Cleaning. Avoid the use of plastic cracks
caused by damage to the solvent. Use clean
cloths and mild soap to remove dirt, dust, etc.
6.
Avoid the tool vibration or impact, and keep it
from oil and grease.
WARNING:
Do not allow the water entering
the tool and the tool full immersed in the ware,
which will result in tool malfunction and electric
shock.
ENVIRONMENT PROTECTION
1. Tool, accessories and packaging should be
sorted for environment-friendly recycling.
2. Power tools and accessories at the end of
their service life still contain large amounts
of valuable raw materials and plastics which
can likewise be fed back into a recycling
process.
3. Some dust created by working contains
harmful chemicals must be collected by
special garbage re-cycle site.
SERVICE
1. In case of guarantee, repair or purchase
of replacement parts, always contact the
qualified service center. And supplied with
the efficient service card and invoice.
2. It is without the scope of guarantee when the
tool was normal wear, overload or improper
use of damage.
Trouble Shooting
PROBLEM
CAUSE
SOLUTION
The tool does
not work
Battery is
depleted
Charge the
battery
Motor
overheating
Be sure
cooling vents
are free from
dust and
obstacles
Clean, clear
vents. Do not
cover with
hand during
operation
Summary of Contents for DI-1015
