15
9
)
Do not charger a battery tool in a damp or
wet location. Following this rule will reduce
the risk of electric shock.
SAFETY RULES FOR CHARGER
1) Protect the battery charger from rain and
moisture.
Water penetration in a battery
charger increases the risk of electric shock.
2) Do not charge other batteries.
The battery
charger is suitable only for charging
m7
lithium-ion batteries within the listed voltage
explosion.
3) Keep the battery charger clean.
Contamination may increase the risk of
electric shock.
4) Before using, always check the charger,
cable and plug. If defects are detected,
do not use the charger; never open the
charger. Instead, have it opened and
will use original spare parts.
Damaged
chargers, cables and plugs increase the risk
of electric shock.
5) Do not operate the charger on easily
etc.) or combustible surroundings.
The
heating of the charger during charging may
6
)
Plug the charger
within the listed voltage
range on the charger.
7
)
Unplug the charger from the electrical
outlet before attempting any maintenance or
cleaning to reduce the risk of electric shock.
8
)
Disconnect charger form the power supply
when not in use. This will reduce the risk of
electric shock or damage to the charger if
metal items should fall into the opening.
9
)
Risk of electric shock. Do not touch the un-
insulated portion of output connector or un-
insulated battery terminal.
ADDITIONAL SAFETY RULES
WARNING:
The safe use of this product
requires an understanding of the information on
the tool and in this operator’s manual, as well
as knowledge of the project you are attempting.
Before use of this product, familiarize yourself
with all operating features and safety rules.
ADAPTERS
ADAPTER STORAGE AREA
be placed in the storage area, located on the
base.
AIR HOSE
The air hose can be used with or without the
DIGITAL GAUGE
The digital gauge measures air pressure,
monitors pressure output, and is used to set
the pressure units..
LOCK-ON BUTTON
The lock-on button is convenient for continuous
reaches 40 PSI, 2.75 BAR, and 2.81 KG/CM2.
ACCIDENTIAL START PREVENTION
the battery pack is reinstalled after detachment
from the tool. Turn the tool OFF and then turn it
ACCESSORIES
Without
Be sure to check the accessories as it is
subject to change by areas and models.
Summary of Contents for DI-1015
