7
MOUNT THE BATTERY ENCLOSURE KIT
1.
Insert the Strain Relief fitting into the access
hole on the bottom of the Battery Enclosure
Kit, then snap it into place .
2.
Identify a suitable mounting location for the
Battery Box, within 6’ of the control box .
NOTE:
For MM371W, MM372W and TS571W
systems, the Battery Box may be placed where
the Control Box is currently located . The Control
Box will be attached to the Battery Box at the
end of the process .
NOTE:
If the mounting surface is not wood (such
as a metal post), you must use a wood panel
between the box and the metal post which
requires additional hardware (not supplied) .
3.
Once you’ve identified a suitable mounting
location, mount the Battery Enclosure Kit
using the provided mounting screws .
NOTE:
Orient the Battery Enclosure Kit with the
arrow on the inside of the box pointed up .
OR
