18
OPTIONAL SECOND BATTERY
(Recommended for Solar installations)
• If you’ll be installing a second battery, connect the second set of harness connectors to the battery .
• Insert the battery into the left side of the Battery Enclosure Kit with the terminals facing outward .
NOTE:
If no second battery is to be installed, leave the second battery set of connectors not connected .
Drill Hole
Location
4.
With the 1/2” hole drilled, feed the Battery Harness connectors from the Battery Enclosure Kit through the Control Box’s
newly drilled access hole .
5.
Use a 7/32” drill bit to drill out the holes required to secure the Control Box to the Battery Enclosure Kit . Use
#10-14 x
3/4” Screws
to attach the Control Panel to the Battery Enclosure Kit .
NOTE:
Control Box mounting screws are not included with MM371W and MM372W .
