3
MM262 Installation Instructions
2. Check Direction of Gate Swing
The Mighty Mule is designed for
PULL-TO-OPEN
installations.
PUSH-TO-OPEN
installations require two
Push-To-Open brackets [FM148]. Push-to-Open Installation
Instructions begin on page 19.
3. Prepare the Gates
• Gates must be plumb, level, and swing freely on their hinges.
• Wheels must
NOT
be attached to the gates.
• The gates must move throughout their arcs
without binding or dragging on the ground.
• Note that gates
over 250 lb. should have ball bearing hinges
with grease fittings.
• The gate post should be be secured in the ground with concrete so it will minimize twist or flex when the opener
is activated.
• The addition of a
horizontal or vertical cross member
(if one is not already in place) to provide a stable area
for mounting the gate bracket is also important.
• Trench the driveway in order to lay PVC conduit for the second opener power cable (see illustration on page 6).
Your Property
Your Property
Pull-To-Open
(arm retracts to open)
Push-To-Open
(arm extends to open)
Horizontal Cross Member
Vertical Cross Member
E
A
B
C
D
F
A – Level
D – Posts Secured in Concrete
B – Plumb
E – Centerline Mounting
C – Free Swinging F – Good Working Hinges
Gate Grounding
(recommended)
• Shorter wire (6 AWG) is better, 1 to 2 feet recommended.
• Bolt ring terminal at end of cable 4 - 6 inches above ground level.
R4196 Kit Includes:
• Ground Rod Clamp
• 6 AWG Wire (3 feet)
NOTE: No grounding system absolutely protects against lightning strikes.
If installed correctly, a grounding system will help minimize damage to
your gate opener.
Metal Gate
Post
6 AWG Wire
8 Foot Ground Rod
5/8” Copper Clad Steel (not included)
- available at local homecenter and hardware stores -
Ground Rod
Clamp
