MM262 Installation Instructions
ix
Product identification label (2)
installed under rear mount of each arm
Logo and warning labels (4)
installed on each side of opener housings
Logo and Manual Disconnect label
installed on control box
362
®
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or play in gate area.
3. This gate is for vehicles only. Pedestrians must use separate entrance.
Maximum Gate: 300 lbs. (136.1 kg); 12 ft. (3.7 m) • Voltage: 12 Vdc;
Frequency: 0Hz; Power: 25W • Class I Vehicular Swing Gate Operator
262
MMDDYY
GTO Access Systems, LLC - Tallahassee, Florida USA
9901178
MM202 SERIES
DC Swing Gate Operator
P/N MM262
Conforms to UL STD 325
Class I Vehicular Gate
S/N:
MM262-0000000
TO MANUALLY OPEN AND CLOSE THE GATE
1. Turn opener power switch OFF.
2. Disconnect front and rear mount from mounting brackets.
3. Remove opener from mounting brackets and move gate.
Disconnect opener ONLY when the power switch is OFF and
the gate is not moving.
www.mightymule.com
1-800-543-GATE (4283)
®
Important Safety Information
Required Safety Precautions for Gates
These warning labels should be found at the locations specified below. If any of them are missing, immediately
contact GTO for replacements.
