18
M i g h t y M u l e 2 0 0
1
K EP
L AR
G
t m
y m
v
t n
t m
2
D n
t
l w
ldr
n t
p
r t
t r
pl
y in
t r
3
This
t is
r v
h l
s n
y P
d s
i ns
mu
t s
s
p r
t n
r n
Moving Ga
e Can
Ca
use
Injury O
r Dea
h
WARNING
!
CHECK LIST
• The gate is plumb, level, and swings smoothly on its hinges.
• A plate or support was added for the gate bracket (if necessary).
• The opener is level and mounted on the centerline of the gate.
• The closed position stop plate is installed in place.
• Unravel the coiled up power cable attached to the control box and opener.
• Mount control box at a location that achieves optimal receiver/transmitter range.
• The top of the fence is an acceptable location for mounting the control box.
• If necessary, attach a backing piece of wood when mounting the control box to a metal fence.
• Leave enough slack in the cable for gate operator movement.
Step 11
Return the gate to the open
position and reconnect the gate
opener front mount to the gate
bracket using the bushing, clevis
pin and hairpin clip. Before
mounting the control box check
the checklist below to be sure
that you have completed the
important installation steps.
Mounting the Control Box
1
EEP CLE
R G
t m
y m
v
t ny
m
2
D n
t ll
w
i d
n t
p
r t
t r
l y
n
t r
3
h s
t is
f r v
hi l
s n
y P
d s ri
ns
mu
t us
s
p r
t n
r n
Moving Ga
e Can
Ca
use
Injury O
r Dea
h
WARNING
!
Backing Piece
of Wood
Control Box
Receiver Antenna
Power Cable
