34
M i g h t y M u l e 2 0 0
Accessories are Available From Your Retail Store
®
E-Z GATE OPENERS
ACCESSORIES
AUT
OMA
T C
GAT
E LO
CK
Solar Panel (FM121) 5 watt (FM123) 10 watt
This solar powered battery charger is for use with the
FM200
gate operator system. Particularly
suited for remote installations, each
Solar Panel
comes with tubular steel support, mounting clips,
wire connectors, and 8 ft. of low voltage wire (see Low Voltage Wire for additional wire). The
Mighty
Mule®
control board has clearly labeled terminal connections for easy installation of the
Solar
Panel
. Installation in some regions of the world will require multiple solar panels for adequate
charging power.
Push Button Control (FM132)
Unlit doorbell button for remote entry or exit control. Wires directly to the control board and uses 16
gauge multi-stranded, dual conductor low voltage wire (sold separately).
Pin Lock (FM133)
The
Pin Lock
substitutes for the clevis pin at the front end of the Mighty Mule® gate openers. Helps
prevent theft of the operator from the gate, while allowing quick release of the operator.
Key Chain Two Button Transmitter (FM134)
The Key Chain Transmitter is a dual button version of the
Mighty Mule®
single button entry
transmitter and has the same adjustable code settings. Used for 2 gates or 1 gate and garage door.
(battery is included)
Single Button Transmitter (FM135)
The
Mighty Mule®
entry transmitter, with adjustable code settings, is standard equipment with all
Mighty Mule®
systems. (battery is included)
Digital Keypad (FM137)
The specially designed digital keypad can be easily installed as a wireless or wired keypad. It can
be programmed to use up to 25 different personal identification number (PIN) codes. Each code is
face programmable with additional security features built in. Wired installations require 16 gauge,
low voltage, multi-stranded, dual conductor, direct burial wire (sold separately). Requires 3 AA
batteries (not included).
Mounting Post (FM100) - In Ground
This black powder coated pedestal is designed to provide convenient access to your keypad,
wireless intercom, or other access control device from your vehicle. With its break down design it
is easy to install and works well in most standard applications. Surface Mount Flanges (F102) and
Extensions (F103) for added height are available.
Mighty Mule® Vehicle Sensor (FM138)
The Gate Opening Sensor is designed for residential and agricultural applications and is compatible
with most Mighty Mule® automatic gate opener models (see Sensor Box for model compatibility).
The Sensor is an electromagnetic sensor, which offers 'hands free' operation of the Mighty Mule®
Gate Operator with a 12 ft. radius of detection of vehicles in motion.
A wireless version of the Gate
Opening Sensor is available. (FM130)
Automatic Gate Lock Pull-to-Open (FM143)
A
MUST for added security. Solenoid driven, with a steel housing. Unlocks and locks automatically
as gates open and close. Used with
Mighty Mule®
DC swing gate operating systems for maximum
stability and security. Comes with a keyed manual release. Recommended for gates over 8 ft. long.
Ideal for animal enclosures or high wind areas.
1
2
3
4
5
6
7
8
9
0
