4
Overview
1.
Power cable with mains plug
2.
360° rotating cable joint with
hanging loop
3.
On/off button
4.
+/– Buttons for temperature
setting )100 °C - 180 °C in 10 °C
steps(
5.
Display
6.
Brush insert with ceramic coating
Switching on/off and adjusting temperature
Before using for the first time
-
Remove all packing material.
-
Check that the device is undamaged.
1.Place the device on a heat-resistant surface.
2. Connect the mains plug to a properly installed and easily accessible
DANGER! Fire hazard
- Never leave the device unattended while it is plugged in.
- Never cover the device or place it on soft objects )e.g. towels(. As long as
the device is switched on and/or hot, always place it on a stable, flat, heat-
resistant surface.
DANGER! Risk of injury through burning
- Do not touch the hot surfaces of the device.
- Allow the device to cool down completely before you clean it or put it away.
WARNING! Risk of material damage
- Use the original accessories only.
- Never place the device on hot surfaces)e.g. hot plates( or near heat
sources or open fire.
- Do not use any astringent or abrasive cleaning agents.
- Do not expose the device to tempera tures below -10 °C or above +40 °C.
1
2
3
4
5
6
Summary of Contents for GHS 50
