MIGEL GHS 50, Instructions Manual

Page: 14 / 17

5
Styling
Switching off automatically
If you do not press a button on the switchedon device for 45 minutes, it
will switch off automatically. Before this happens, the temperature display
will flash in the display. Press the on/off button for approx. 2 seconds to
switch the device back on.
wall socket whose voltage corresponds to the specifications on the rating
plate. The wall socket must continue to be easily accessible after the device
is plugged in.
3. Press the on/off button for approx.2 seconds to switch the device on. The
display 5 shows 150.
4. Use the +/– buttons to set the desired temperature between 100 °C and
180 °C in 10 °C steps. LED segments moving clockwise in the display will
indicate that the device is heating up.
NOTE: LED segments running anticlockwise indicate that the device is
cooling down. Wait until the desired temperature appears in the display
before straightening your hair.
5. In order to avoid changing the temperature by accidentally pressing the
+/- buttons, you can lock these buttons.
- Press one of the +/- buttons for approx.2 seconds. The buttons are now
locked. The display 5 shows .
- Press one of the +/- buttons again for approx. 2 seconds. The buttons
are now unlocked. The display 5 stops showing .
6. Press the on/off button for approx. 2 seconds to switch the device off.
7. Allow the device to cool down on the heat-resistant surface.
WARNING: The right temperature
-
Hair can be damaged by excessive temperature, excessively long contact
or too frequent straightening. Particularly at higher temperatures, you
should not treat the same strand of hair more than once
- Start with the lowest temperature that is recommended for the hair texture to be
treated.
- Increase the temperature in small steps if the straightening process is taking toolong.