Preparatory measures for initial operation
© MIG·O·MAT GmbH
BA_Lötstar_EN_Vers. 07.2016
23
5.6
Setting of operating language in the display
Switch on the Lötstar unit at the mains switch on the back of the
unit (
see illustration 4.7
.).
The display is activated and shows the following indication:
MIG-O-MAT
Lötstar
Switch the unit into operating mode by pressing the
on/off
key
I/O
at the operating panel for a short period.
The gas reactor is now switched on and the display is lighted.
The programme offers to carry out a leak check. Press the key
(
No
) at the operating panel to stop the check.
Press the key
at the operating panel twice.
Depending on the basic setting the display shows the following
options:
Sprache:
Deutsch
Language:
English
Langue:
Français
Select the requested operating language with the key
I/O
at the
operating panel and enter the setting by pressing the key
.
Now the operating language has been set.
Switch off the unit by pressing the
on/off
key
I/O
at the
operating panel*.
*The unit programme offers to carry out the required leak check
only after restart of the unit.
Switch the unit into
operating mode
Interrupt / stop the
leak check
Select a display
language
Switch off the unit
