Mier Drive-Alert DA-700, Instruction Manual

Page: 2 / 20

Mier’s DA-700 and DA-700-611 Wireless Vehicle Detection Systems include:
• Control Panel/Receiver with Additional Form C Dry Contacts
• Sensor/Transmitter
• Internal chime with volume control and choice of three (3) different chimes
• Zoning capability to monitor up to three (3) different areas
• Ability to mute alerts for a timed period with internal button or with an accessory button
• +24 and +12 volt DC power sources for use with accessories
• Relay output available for use with accessories, including two (2) programmable timers
• Visible POWER LED to monitor power status and LO BATT LED to monitor Transmitter batteries
• User accessible address switches to set a unique address code between the Control Panel/Receiver and the Sensor/Transmitter
• Normal reception to 1000 feet, or 3/4-mile if using the DA-660 Booster Antenna (see Options For Long Range Installations page)
• Use of an unlimited Wireless Sensor/Transmitters (DA-610TO, DA-611TO, DA-612TO) with a DA-700 Control Panel/Receiver
• Compatible with Mier Accessories detailed in this manual (See Accessories Page), as well as many after-market accessories
• Compatible with and interface with many security panels and systems (call our tech support for assistance)
• UL Listed switching mode power supply, isolated from ground, with input voltage of 100 to 240 50/60HZ, which provides better
lightening rejection. Output regulation of 24VDC +/- 0.5A with output short circuit protection with current limit until fault is cleared.
DA-700
DA-700-611
REMEMBER, you are welcome to contact our Tech Support Team and we will be happy to “Google™earth” your installation site, and provide
you with information on the products needed, and locations for each piece to meet your installation/application goals.
Don’t forget to check out our website for cut-sheets, installation manuals, installation examples, and information on more products!
2
DA-700 and DA-700-611 Wireless Drive-Alert Features