Mier Drive-Alert DA-700 Instruction Manual Download Page 18

Page: 18 / 20

NOTES

Date of Drive-Alert Installation: ______________________________________________________________________________________

Name of Installer and Installation Company: ___________________________________________________________________________

Phone number and email of Installer/Company: ________________________________________________________________________

Mier Product’s Drive-Alert Equipment Installed and Part Numbers: _________________________________________________________

________________________________________________________________________________________________________________

Name/Contact Information of where the Mier Products’ Drive-Alert Equipment was purchased if different than Installation Company:

_______________________________________________________________________________________________________________

Other manufacturer’s and Accessories/Equipment Installed and Part Numbers: _______________________________________________

________________________________________________________________________________________________________________

Name/Contact Information of where the other Equipment was purchased if different than Installation Company above:

_______________________________________________________________________________________________________________

Summary of Contents for Drive-Alert DA-700




















