Miele WWV 980 WPS Passion Operating Instructions Manual Download Page 18

Page: 18 / 120

Before using for the first time



Damage resulting from incorrect

installation and connection.
Installing and connecting the wash-
ing machine incorrectly will cause
serious property damage.
See “Installation and connection”.

This washing machine has undergone
a complete functional test at the fact-
ory and there will be some residual
water in the drum from this process.

Protective foil and stickers re-
moval



Remove:

– The protective foil from the door

– Any stickers from the front and the lid

Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.

Remove the detergent cart-
ridges and the drain hose el-
bow from the drum

Two detergent cartridges for automatic
detergent dispensing and an elbow
piece for the drain hose are stored in
the drum.



Pull open the door.



Take the two cartridges and the el-
bow piece out of the drum.



Shut the door with a gentle swing.

Summary of Contents for WWV 980 WPS Passion

























































































































Search results

Summary of Contents for WWV 980 WPS Passion

Reviews:

Related manuals for WWV 980 WPS Passion

Brands by name

Popular brands

Miele WWV 980 WPS Passion, Operating Instructions Manual

Search results

Summary of Contents for WWV 980 WPS Passion

Reviews:

Related manuals for WWV 980 WPS Passion

Brands by name

Popular brands