background image

7. At the end of the programme

41

At the end of the programme

The door remains locked during the
Anti-crease phase and 

Finish/Anti-crease

and 

Unlock with “Start/Stop”

 appear in

the display.

Touch the 

Start/Stop

 sensor. The

door will be unlocked.

The interior drum lighting will come
on.

Useful tip: 

The door unlocks

automatically at the end of the Anti-
crease phase.

Take hold of the door and pull it
open.

Remove the laundry.

Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Check that all items have been
removed from the drum.

Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.

Useful tip: 

For safety reasons, close the

door when the washing machine is not
in use. Otherwise there is a danger of
objects being placed inadvertently in
the drum. If these remain unnoticed and
were washed in the next load, they
could damage the laundry. An open
door is also a danger to pets and
children.

Switch the washing machine off with
the 

 sensor.

If applicable, remove the used
capsule from the detergent dispenser
drawer.

Useful tip: 

Leave the detergent

dispenser drawer slightly open to allow
it to dry.

Summary of Contents for WWR860





















































































































Reviews: