Installation
*INSTALLATION*
97
Drainage
The suds are drained through a drain
pump with a 1 m high delivery head. For
the water to drain freely, the hose must
be free of kinks.
If required, the hose can be extended to
a length of up to 5 m. The necessary
parts can be ordered from Miele
(depending on country).
For a delivery head of more than 1 m
(up to a max. of 1.8 m), a replacement
drain pump will need to be fitted.
Please contact Miele for advice.
For a delivery head of 1.8 m, the hose
can be extended to a length of up to
2.5 m. The necessary parts can be
ordered from Miele (depending on
country).
Drain hose connection options
1. Directed into a laundry trough or tub
or into the sud-saver pipe of a
laundry trough or tub.
Please note:
– Hook the hose over the edge and
secure it.
– Make sure that the water can drain
away freely without hindrance.
Otherwise there is a risk of water
overflowing or of some of the
drained water being sucked back
into the machine.
2. Connected securely to a trapped
waste pipe.
3. Connected securely to a floor drain
(gully).
Securing the drain hose to the wash
basin
Please note:
a
Adapter
b
Washbasin nut
c
Hose clip
d
End of the hose
Fit the adapter
to the sink drain
outlet using the nut
.
Attach the end of the hose
to the
adapter
.
Use a screwdriver to tighten the hose
clip
up close to the nut.
