Miele WWR 860 WPS Operating Instructions Manual Download Page 69

Page: 69 / 116

Cleaning and care

Cleaning the siphon and the





compartment channel

Liquid starch results in clogging. If
clogged, the siphon in the





compartment will not work and the
compartment can overflow.
Clean the siphon particularly
thoroughly after using liquid starch a
few times.

Remove the siphon from the



compartment and clean under

warm running water. Clean the
siphon tube in the same way.

Refit the siphon.



Clean the fabric softener channel
using a brush and warm water.

Cleaning the detergent dispenser
drawer housing



Use a bottle brush to remove
detergent residues and limescale
from the jets inside the detergent
dispenser drawer compartment.



Replace the detergent dispenser
drawer.

Useful tip:

To assist drying, leave the

detergent dispenser drawer slightly
open.

Summary of Contents for WWR 860 WPS





















































































































Search results

Summary of Contents for WWR 860 WPS

Reviews:

Related manuals for WWR 860 WPS

Brands by name

Popular brands

Miele WWR 860 WPS, Operating Instructions Manual

Search results

Summary of Contents for WWR 860 WPS

Reviews:

Related manuals for WWR 860 WPS

Brands by name

Popular brands