Miele WWE760 Operating Instructions Manual Download Page 14

Page: 14 / 104

Operating the washing machine

Control panel

Control field

The control field consists of a dis-
play and various sensor controls.
The individual sensors are explained
in the following sections.

Display

The following values are shown on
the display and/or selected from it:
1. The temperature, spin speed, and

time left for the selected wash
programme.

2. The individual values for selected

extras and settings.



sensors

Values shown in the display can be
changed with the



sensors. The



sensor increases the value or

moves up the list; the



sensor de-

creases the value or moves down
the list.

OK sensor

The

sensor is used for confirm-

ing selected values.

TwinDos sensor controls with op-
tions for Whites and Colours

The TwinDos sensor is used for de-
activating and activating automatic
detergent dispensing. Depending
the colour mix of your load you can
control the detergent combination
by selecting

Whites

Colours

Further information can be found in
the “TwinDos” chapter.

Optical interface

This is used by the Service depart-
ment as a transmission point.

Summary of Contents for WWE760









































































































Search results

Summary of Contents for WWE760

Reviews:

Related manuals for WWE760

Brands by name

Popular brands

Miele WWE760, Operating Instructions Manual

Search results

Summary of Contents for WWE760

Reviews:

Related manuals for WWE760

Brands by name

Popular brands