Miele WWD 120 Operating Instructions Manual Download Page 31

Page: 31 / 84

Programme chart

Delicates

Cold to 40 °C

Max. load 2.0 kg

Items

Delicate garments made from synthetic fibre, mixed fibre and
viscose

Performance outerwear (e.g. jackets and trousers) made from
membrane fabric such as Gore-Tex®, SYMPATEX®,
WINDSTOPPER®, etc.

Curtains specified as machine-washable by the manufacturer.

Tip

- On outdoor clothing, fasten zips or close Velcro fasteners and do

not use fabric conditioner.

- If required, these items can also be re-proofed using the

Proofing

programme. Proofing after each wash cycle is not

recommended.

- Dust in curtains usually means that a programme with Pre-wash is

advisable.

- Deselect the spin speed for items which crease easily.

Woollens



Cold to 40 °C

Max. load 2.0 kg

Items

Wool or wool blend fabric

Tip

Reduce the spin speed for fabric that creases easily.

Shirts

Cold to 60 °C

Max. load 1.0 kg/2.0 kg

Items

Shirts and blouses made of cotton and mixed fibre

Tip

- Pre-treat collars and cuffs depending on the level of soiling.

- Wash silk shirts and blouses in the

Delicates

programme.

- If the preset

Pre-ironing

extra is switched off, the maximum load

capacity is increased to 2.0 kg.

Summary of Contents for WWD 120





















































































Search results

Summary of Contents for WWD 120

Reviews:

Related manuals for WWD 120

Brands by name

Popular brands

Miele WWD 120, Operating Instructions Manual

Search results

Summary of Contents for WWD 120

Reviews:

Related manuals for WWD 120

Brands by name

Popular brands