Miele WWD 120 Operating Instructions Manual Download Page 26

Page: 26 / 84

5. Start the programme

Starting a programme



Touch the flashing

Start

Add laundry

sensor control.

The door locks and the programme
starts.

If a Delay start time has been selected,
this counts down on the time display. At
the end of the Delay start time or
immediately after the programme has
started, the programme duration
appears on the time display.

Energy savings

After 10 minutes, the indicators dim.
The sensor control

Start

Add laundry

flashes.

To reactivate the indicators:



Touch the

Start

Add laundry

sensor

control (this does not have any effect
on a programme that is running).

Adding laundry during a
programme sequence
(AddLoad)

Laundry can be added or removed at
any time, provided that the



symbol

is not illuminated on the control field.



Touch the

Start

Add laundry

sensor

control.

Rotating bars



...



...



are

shown on the time display.

If the word



appears on the time

display, the door can be opened.



Open the door and add or remove
laundry.



Close the door.



Touch the

Start

Add laundry

sensor

control.

The programme will continue.

Laundry cannot usually be added or
removed if:

- The suds temperature is above 55 °C

- The water inside the drum is above a

certain level

Summary of Contents for WWD 120





















































































Search results

Summary of Contents for WWD 120

Reviews:

Related manuals for WWD 120

Brands by name

Popular brands

Miele WWD 120, Operating Instructions Manual

Search results

Summary of Contents for WWD 120

Reviews:

Related manuals for WWD 120

Brands by name

Popular brands