Miele WTW 870 WPM Operating Instructions Manual Download

Page: 61 / 128

Drying

2. Selecting a programme

Switching the washer-dryer on



Press the



sensor.

The interior drum lighting will come on.

The drum lighting will go out
automatically after a few minutes.

Useful tip:

To switch the drum lighting

on again, open the pull-down menu
from the overview menu and then touch
the



sensor.

The main menu will then appear in the
display.

Selecting a programme



Touch the

Drying

sensor.



11:02











1:30

1:29

0:39

1:20

Cottons

ECO 40-60

QuickPower

Minimum iron

Drying

Help



Scroll to the right of the display until
the programme you want appears.



Touch the sensor for that programme.

The display will then change to the
standard menu for the programme.



11:02

1600



1:29

Cottons

Drying

Drying level

Extras

not selected

 Timer

 Save

rpm



Spin speed

Normal

There are 3 other ways to select a
programme:

- Saved favourite programmes

- The Washing/Drying assistant

- Miele MobileStart

Summary of Contents for WTW 870 WPM

































































































































Search results

Summary of Contents for WTW 870 WPM

Reviews:

Related manuals for WTW 870 WPM

Brands by name

Popular brands

Miele WTW 870 WPM, Operating Instructions Manual

Search results

Summary of Contents for WTW 870 WPM

Reviews:

Related manuals for WTW 870 WPM

Brands by name

Popular brands