background image

DRYING

64

Delicates

Max. load 1.0 kg*

Normal plus, Normal, Hand iron, Timed drying

1

Items

Delicate items with the 

 symbol on the care label made of syn-

thetic fibres, artificial silk, easy care cotton or mixed fibres, e.g.
shirts, blouses, lingerie and evening wear with sequins and beading.

Tip

Reducing the load will reduce creasing.

Shirts

Max. load 1.0 kg*

Normal plus, Normal, Hand iron, Timed drying

1

Items

Shirts and blouses

Tip

- Turn shirts and blouses inside out, do up buttons and turn collars

and cuffs inwards.

- The laundry is dampened before the programme starts to help re-

duce creasing.

Woollens

Max. load 2.0 kg*

3 minutes

Items

Woollen garments and fabric containing wool blends, e.g. pullovers,
cardigans, tights

Tip

- Wool and wool blend items are only fluffed up; they are not dried

completely.

- Remove the garments immediately after the end of the pro-

gramme.

Denim

Max. load 3.0 kg*

Normal plus, Normal, Hand iron, Timed drying

1

Items

All denim garments, e.g. jeans, jackets, skirts, shirts

Summary of Contents for WTR 860 WPM

































































































































Reviews: