Miele WTR 860 WPM Operating Instructions Manual Download

Page: 37 / 128

WASHING



Detergent drawer

Any detergent suitable for domestic
washing machines can be used. Please
observe the instructions for use and
dosage on the detergent packaging.

Ensure that TwinDos dispensing is
deactivated.

Adding detergent



Pull out the detergent drawer and add
detergents to the compartments.



Detergent for the pre-wash



Detergent for the main wash and
soaking




Fabric conditioner, liquid starch
or capsules

Using liquid detergents with a pre-
wash

Liquid detergent cannot be used for the
main wash if the pre-wash has been se-
lected.

Use powder detergent for the main
wash.

Using detergent tablets or pods

Always put detergent tablets or pods
directly in the drum with the laundry.
They cannot be added via the detergent
drawer.

Summary of Contents for WTR 860 WPM

































































































































Search results

Summary of Contents for WTR 860 WPM

Reviews:

Related manuals for WTR 860 WPM

Brands by name

Popular brands

Miele WTR 860 WPM, Operating Instructions Manual

Search results

Summary of Contents for WTR 860 WPM

Reviews:

Related manuals for WTR 860 WPM

Brands by name

Popular brands