Miele WTR 860 WPM Operating Instructions Manual Download

Page: 31 / 128

WASHING

2. Select a programme

Switching the washer-dryer on



Press the



button.

The drum lighting will come on.

The drum lighting will go out automat-
ically after a few minutes.

Tip:

To switch the lighting on again,

open the pull-down menu from the
overview menu and then touch the



sensor control.

The main menu will then appear in the
display.

Selecting a programme



Touch the

Washing

sensor control.



11:02











2:09

2:29

1:39

0:49

Cottons

ECO 40-60

QuickPower

Minimum iron

Washing

Help



Scroll to the right in the display until
the programme you want appears.



Touch the sensor control for that pro-
gramme.

The display will then change to the
standard menu for the programme.



11:02

40 °C

1600



2:29

Cottons

Washing

Temperature

Spin speed

TwinDos

Extras

not selected

Colours

 Timer

 Save

rpm



There are 3 other ways to select a pro-
gramme:

- Saved favourite programmes

- The washing/drying assistant

- Miele MobileStart

Summary of Contents for WTR 860 WPM

































































































































Search results

Summary of Contents for WTR 860 WPM

Reviews:

Related manuals for WTR 860 WPM

Brands by name

Popular brands

Miele WTR 860 WPM, Operating Instructions Manual

Search results

Summary of Contents for WTR 860 WPM

Reviews:

Related manuals for WTR 860 WPM

Brands by name

Popular brands