Miele WT 2780 Operating Instructions Manual Download

Page: 45 / 92

Hygiene

Max. load 3.0 kg*

Normal

Suitable for Cotton and linen fabric which is in direct contact with the skin, e.g.

underwear, nappies, towelling, bed linen, pillow and mattress
covers.

Important

Because the temperature is held for longer the laundry will feel drier.

Extras

Thermospin, Extra quiet

First wash

Max. load 3.0 kg*

, Normal, Hand iron

, Sm

, Timed drying

Suitable for New items made of cotton, towelling and polyester fabric.

Extras

Thermospin

Silks

Max. load 1.0 kg*

5 minutes

Suitable for Silks (suitable for drying in a tumble dryer), e.g. blouses and shirts.

Note

– Smooths out creasing.

– Garments are not totally dried in this programme.

– Remove garments immediately at the end of the programme.

Pillows

2 pillows (40x80 cm) or 1 pillow (80x80 cm)

Timed drying

Suitable for Pillows suitable for drying in a tumble dryer, with feather, down or

synthetic fillings.

Note

Please observe the instructions on the care label. Pillows can still
feel damp after being dried. You can use this programme several
times until the pillow feels dry.

Cool air

Max. load 3.0 kg*

Timed drying

Suitable for Any item which only needs airing.

* Weight of dry laundry

1) 2)

See the page which follows this chart

DRYING

Summary of Contents for WT 2780





























































































Search results

Summary of Contents for WT 2780

Reviews:

Related manuals for WT 2780

Brands by name

Popular brands

Miele WT 2780, Operating Instructions Manual

Search results

Summary of Contents for WT 2780

Reviews:

Related manuals for WT 2780

Brands by name

Popular brands