Miele WSG 663 Series Operating Instructions Manual Download Page 92

Page: 92 / 108

Settings

You can use the settings to alter the
washing machine's electronics to suit
changing requirements.

The settings can be altered at any
time.

Accessing the Settings menu



Turn the programme selector to the

Further programmes



position.

Outerwear











Touch the



sensor controls until

the following appears in the display:

Settings 











Confirm with the

sensor control.

Language 









You are now in the

Settings

sub-menu.

Selecting settings



Touch the



sensor controls until

the setting you want appears in the
display.

– The



sensor control scrolls down

the list.

– The



sensor control scrolls up the

list.



Touch the

sensor control to select

the setting displayed.

Changing a setting



Touching the



sensor controls will

call up the different options for the
setting.

The option that is selected will have a
tick



next to it.



Touch the

sensor control to activ-

ate the option you want in the dis-
play.

Closing the settings menu



Turn the programme selector.

Summary of Contents for WSG 663 Series













































































































Search results

Summary of Contents for WSG 663 Series

Reviews:

Related manuals for WSG 663 Series

Brands by name

Popular brands

Miele WSG 663 Series, Operating Instructions Manual

Search results

Summary of Contents for WSG 663 Series

Reviews:

Related manuals for WSG 663 Series

Brands by name

Popular brands