Before using for the first time
20
3. Remove the transit bars
Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing ma-
chine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in “Installation and connection”.
The following message appears in the
display:
Remove transit bars
Confirm with the
OK
sensor control.
4. Commissioning TwinDos
The UltraPhase 1 and UltraPhase 2 val-
ues are preset in the standard settings
and only need to be confirmed.
The following message appears in the
display:
TwinDos
Confirm with the
OK
sensor control.
The following message appears in the
display:
Set now
To set up TwinDos now, touch the
OK
sensor control.
To postpone setup until later: touch
the
sensor control until the follow-
ing appears in the display:
Set later
and press
OK
to confirm.
Settings for compartment
The UltraPhase 1 values are preset in
the standard settings.
Agent for
OK
Confirm with the
OK
sensor control.
Miele UltraPhase 1
OK
Confirm with the
OK
sensor control.
The following appears in the display:
Set the dosage. Observe water hardness
levels
Confirm with the
OK
sensor control.
The dispensing quantity for
UltraPhase 1 is preset for
(hardness
level II)
.
Per load
OK
ml
58
Confirm the preset value with the
OK sensor control. If you want to
change this value, use the
sensor controls and confirm with
the
OK
sensor control.
UltraPhase 1
Hardness level I
46 ml
Hardness level II
58 ml
Hardness level III
70 ml
