Plumbing
Connection to drainage
–
Machines with a drain pump
The machine drains via a drain pump
with a delivery head of 1 metres. The
1.5 m long drain hose must not be
kinked as this restricts drainage.
The drain hose may be connected as
follows:
Direct into a sink: Hook the hose
over the edge and secure (version
with drain pump (LP). Make sure that
the water can flow away freely to
avoid flooding and to prevent water
from being sucked back into the ma-
chine.
Connected to a plastic drain pipe
with a rubber seal. There is no need
to use a non-return valve.
Directed into a standpipe, (seal hose
into pipe to avoid flooding in the
case of the drainpipe being blocked).
Allowing the water to drain off into a
floor drain.
If required, the hose can be extended
to a length of 5 m.
–
Drain valve version
The machine drains via an electromag-
netic drain valve. The DN 70 angle
hose provided enables the machine to
be drained via an on-site gully drain
(with odour trap).
43
