
The following message appears in the display
Fault message
Possible cause
Remedy
Heating fault
The washing machine
was unable to heat up.
Start the programme again.
If the fault message appears
again, contact Miele.
Check hot inlet
The water inlet of the
second hose (with red
label) is blocked.
The washing machine
washed in the cold water
mode.
Check whether
– the tap has been opened
properly.
– the inlet hose is kinked.
– the water pressure is too low.
Chk detergent
Excessive foam has built
up during washing.
Use less detergent next time
and follow the manufacturer's
instructions on dosage given on
the packaging.
Hygiene info
A programme of at least
60°C has not been run for
a long period of time.
Run the
Maintenance
programme with the Original
Miele dishwasher and washing
machine cleaner or a powder
universal detergent to prevent
the formation of organic
deposits and unpleasant
odours in the machine.
The messages are displayed at the end of a programme and when the washing
machine is switched on.
Problem solving guide
54