Final spin speed
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. For the programme
Cottons
with a spin speed of less than
700 rpm, an additional rinse is
introduced.
To omit the final spin (Rinse hold)
^
Press the
Spin speed
button to
choose the
Rinse hold
setting. The
laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
– To start the final spin:
The washing machine will display the
maximum spin speed possible. You
can select a lower spin speed. Start
the final spin by pressing the
Start/Stop
button.
– To end the programme:
Press the
Door
button. The water will
drain away. Press the
Door
button
again to open the door.
To omit rinse and interim spin and
the final spin (No
.
)
^
Press the
Spin speed
button to
choose the
No
.
setting.
The water will drain away and the
machine will go straight into the
anti-crease stage.
An additional rinse is introduced for
some programmes in this setting.
Spinning
24
Programme
rpm
Cottons
1600
Minimum iron
1200
Delicates
600
Woollens
/
1200
Proofing
1000
Express 20
1600
Automatic plus
1200
Darks and denim
1200
Shirts
600
Spin
1600
Separate rinse/Starch
1200
Maintenance prog.
–
Hygiene
1600
Outerwear
800
Down duvets
1200
Cottons Eco
1600
Cottons Eco plus
1600
Minimum iron Eco
1200
