I
Start the programme
^
Press the flashing
Start/Stop
button.
If a delay start time has been selected,
then this will count down in the display.
At the end of the delay start time, or im-
mediately after the programme has
started (if no delay start time has been
selected), the estimated programme
duration will appear in the display.
During the first 8 minutes the machine
measures how much water is being
absorbed by the laundry. The
programme duration may be longer or
shorter depending on this absorbency
rate.
The programme sequence is also
shown in the display. The washing
machine shows you when each section
of the programme is reached.
J
Remove the laundry when the
programme has finished
After the programme has finished, the
following will appear in the display:
0:00
Finish
^
Press the
Door
button to open the
drum door.
The machine will switch off
automatically 15 minutes after the
end of the Anti-crease phase. Push
the
K
button to switch the machine
back on.
^
Remove the laundry.
Check that all items have been
removed from the drum. Items left in
the drum could discolour other items
in the next wash or become
discoloured themselves.
^
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
^
Switch the machine off with the
K
button.
To avoid the build-up of mildew, it is
recommended that the door is left
ajar when the machine is not in use.
How to wash correctly
23
