Miele W 5741 Operating Instructions Manual Download Page 63

Page: 63 / 68

Standby display

To save energy, the display goes out
after 10 minutes and the indicator
light for the

Start/Stop

button will start

flashing slowly.

There are two options:

Standby is activated:

– if a programme is not selected within

10 minutes of the machine being
switched on.

– after a programme has started.

– at the end of a programme.

Not in current prog.

(the machine is delivered with this
option selected)

Standby is activated:

– if a programme is not selected within

10 minutes of the machine being
switched on.

– at the end of a programme.

Pressing one of the buttons switches
the display back on again.

Memory

If an Extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.

When this programme is chosen again,
these settings will appear in the
display.

The machine is delivered with the
memory function deactivated.

Anti-crease

Anti-crease helps prevent creasing if
laundry is not normally removed im-
mediately after the end of a
programme.

The drum will turn at intervals for up to
30 minutes after the programme has
finished.

The door can be opened and laundry
removed at any time during the anti-
crease phase.

Anti-crease is activated.

Off

(the machine is delivered with this
option selected)

Anti-crease is deactivated.

Programmable functions

Summary of Contents for W 5741





































































Search results

Summary of Contents for W 5741

Reviews:

Related manuals for W 5741

Brands by name

Popular brands

Miele W 5741, Operating Instructions Manual

Search results

Summary of Contents for W 5741

Reviews:

Related manuals for W 5741

Brands by name

Popular brands