Miele W 5741, Operating Instructions Manual

Page: 19 / 68

Final spin speed
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. For the programme
Cottons with a spin speed of less than
700 rpm, an additional rinse is
introduced.
To omit the final spin (Rinse hold)
^
Press the Spin speed button to
choose the Rinse hold setting. The
laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
– To start the final spin:
The washing machine will display the
maximum spin speed possible. You
can select a lower spin speed. Start
the final spin by pressing the
Start/
Stop button.
– To end the programme:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin and
the final spin (No
.
)
^
Press the Spin speed button to
choose the No
.
setting.
The water will drain away and the
machine will go straight into the anti-
crease stage.
An additional rinse is introduced for
some programmes in this setting.
Spinning
19
Programme rpm
Cottons 1400
Minimum iron 1200
Delicates 600
Woollens
/
1200
Proofing 1000
Express 20 1400
Automatic plus 1200
Darks and denim 1200
Shirts 600
Intensive plus 1400
Spin 1400
Separate rinse/Starch 1400