Miele W 3831 WPS Operating Instructions Manual Download

Page: 62 / 68

Increase the duration of the
main wash

This setting is used to select the
length of time (15, 30 or 60 minutes)
by which the main wash is increased
when the

Heavy

Degree of soiling

option is selected.

The washing machine is delivered with
the increase for the duration of the main
wash set at 15 minutes.

Follow steps

to programme

and store in memory.

Before you begin, first ensure that:

– The washing machine is switched off.

– The drum door is properly closed.

Press the

Start/Stop

button and keep

it pressed in whilst carrying out steps

Press the

I-On/0-Off

button in.

Wait until the indicator light for the

Start/Stop

button starts comes on . . .

. . . and then release the

Start/Stop

button.

Press the

Buzzer

button three times.

– The

Buzzer

indicator light will flash

four times.

– A

will flash in the display

alternating with the number

Each subsequent press of the

Start/

Stop

button will select a different

setting.

The number alternating with the

in the

display refers to the settings as follows:

= 60 minutes

= 30 minutes

= 15 minutes (factory default setting)

Switch the machine off with the

I-On/

0-Off

button.

The setting you have chosen for the
increase in the duration of the main
wash has now been allocated to the

Heavy

Degree of soiling option. This

setting will remain in memory until
another setting is programmed.

Programmable functions

Summary of Contents for W 3831 WPS





































































Search results

Summary of Contents for W 3831 WPS

Reviews:

Related manuals for W 3831 WPS

Brands by name

Popular brands

Miele W 3831 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 3831 WPS

Reviews:

Related manuals for W 3831 WPS

Brands by name

Popular brands