Miele W 3652 WPS Operating Instructions Manual Download

Page: 65 / 68

Standby

To save energy, the display goes out
after 10 minutes and the indicator
light for the

Start/Stop

button will start

flashing slowly.

There are two options:

Standby is activated:

– if a programme is not selected after

the machine has been switched on.

– after a programme has started.

– at the end of a programme.

Not in current Prog. (the machine is
delivered with this option selected)

Standby is activated:

– if a programme is not selected after

the machine has been switched on.

– at the end of a programme.

Pressing one of the buttons switches
the display back on again.

A tick

will appear beside the option

to show that it has been set.

Memory

If an extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.

When this programme is chosen again
these settings will appear in the display.

The machine is delivered with the
memory function deactivated.

A tick

will appear beside the option

to show that it has been set.

To close the Settings menu

Back

Language

Time ...

Select

Back

and confirm your

selection.

Settings menu

Summary of Contents for W 3652 WPS





































































Search results

Summary of Contents for W 3652 WPS

Reviews:

Related manuals for W 3652 WPS

Brands by name

Popular brands

Miele W 3652 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 3652 WPS

Reviews:

Related manuals for W 3652 WPS

Brands by name

Popular brands