Miele W 2888 WPS Operating Instructions Manual Download Page 30

Page: 30 / 80

Spin

For spinning fabrics. Please make sure you select the appropriate spin speed.

Denim cold to 40°C

Fabric

Denim fabrics, e.g. jeans, skirts, shirts.

Notes

–

Wash dark garments inside out.

–

Denim often contains excess dye and will run during the
first few washes. Wash light and dark coloured items
separately.

Extras

Rinse hold

Detergent

Detergent for coloured fabrics, liquid detergent, detergent for
delicates

Max. load

2.0 kg

Shirts cold to 60°C

Fabric

Shirts and blouses

Notes

–

Pre-treat colours and cuffs if necessary.

–

Wash silk blouses in the

Silks

programme.

Extras

Rinse hold

Detergent

Powder detergent, detergent for coloured fabrics, liquid
detergent, tablet detergent and liquid tab detergent

Max. load

1.5 kg

Outer wear cold to 40°C

Fabric

Outer wear made from micro-fibres such as Gore-Tex

SYMPATEX

, WINDSTOPPER

etc.

Notes

–

Zip up jackets before washing.

–

Do not use fabric conditioner.

Extras

Rinse hold

Detergent

Detergent for delicates (mainly liquids).

Max. load

2.0 kg

Programme chart

Summary of Contents for W 2888 WPS

















































































Search results

Summary of Contents for W 2888 WPS

Reviews:

Related manuals for W 2888 WPS

Brands by name

Popular brands

Miele W 2888 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 2888 WPS

Reviews:

Related manuals for W 2888 WPS

Brands by name

Popular brands