Miele W 2888 WPS Operating Instructions Manual Download Page 76

Page: 76 / 80

Stand-by

To save energy, the display goes out after 10 minutes and
the

Start

button flashes slowly.

There are two options:

Stand-by comes on:

– if a programme is not selected after the machine has been

switched on.

– after a programme has started.

– at the end of a programme.

Not in current Prog. (the machine is delivered with this option
selected)

Stand-by comes on:

– if a programme is not selected after the machine has been

switched on.

Operating the multi-function selector or one of the short cut
buttons switches the display back on again.

A tick will appear beside the option to show that it has been
set.

SETTINGS

Back

STAND-BY

Not in current prog.

Select the option you want and confirm your selection.

Settings menu

Summary of Contents for W 2888 WPS

















































































Search results

Summary of Contents for W 2888 WPS

Reviews:

Related manuals for W 2888 WPS

Brands by name

Popular brands

Miele W 2888 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 2888 WPS

Reviews:

Related manuals for W 2888 WPS

Brands by name

Popular brands