Miele W 2888 WPS Operating Instructions Manual Download Page 29

Page: 29 / 80

Quick wash cold to 40°C

e67

Fabric

Small loads of lightly soiled laundry which can be washed in a

Cottons Universal

programme.

Extras

Water plus, Rinse hold

Detergent

Powder detergent, detergent for coloured fabrics, liquid
detergent

Max. load

2.5 kg

Woollens

cold to 40°C

gca

Fabric

Machine-washable or hand-washable wool or wool blend
fabrics. If the care label does not specify a temperature wash
using the cold setting.

Extras

Rinse hold

Detergent

Liquid detergent for machine-washable woollens.

Max. load

2.0 kg

Silks

cold to 30°C

Fabric

Hand-washable fabrics with no wool content, e.g. satin, lace
and silk.

Notes

–

Place socks, tights, bras etc. in a washing bag.

Extras

Water plus, Rinse hold

Detergent

Detergent for delicates (mainly liquids).

Max. load

2.0 kg

Starch

Fabric

Table cloths, napkins, overalls, aprons.

Notes

–

The laundry should be washed but not treated with fabric
conditioner.

Extras

Rinse hold

Max. load

5.0 kg

Separate rinse

Fabric

Articles which have been washed by hand and only need to
be rinsed and spun in the machine.

Extras

Rinse hold

Max. load

5.0 kg

Programme chart

Summary of Contents for W 2888 WPS

















































































Search results

Summary of Contents for W 2888 WPS

Reviews:

Related manuals for W 2888 WPS

Brands by name

Popular brands

Miele W 2888 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 2888 WPS

Reviews:

Related manuals for W 2888 WPS

Brands by name

Popular brands