Miele W 2839I WPM Operating Instructions Manual Download Page 74

Page: 74 / 80

Temperature unit

You can chose for the temperature to
be displayed in

°C/Celsius

°F/Fahrenheit

A tick

will appear beside the option

to show that it has been set.

Buzzer

An audible tone sounds repeatedly at
the end of a programme and when
Rinse hold is reached.

There are two volumes:

Off

(default setting)

The buzzer is switched off.

Normal

The buzzer sounds at the end of a
programme or when Rinse hold is
reached.

Loud

The buzzer sounds at maximum volume

Loud

at the end of a programme or

when Rinse hold is reached.

A tick

will appear beside the option

to show that it has been set.

Keypad tone

An audible tone sounds each time a
button is pressed.

The machine is delivered with the
keypad tone switched off.

A tick

will appear beside the option

to show that it has been set.

Brightness

There are ten different display
brightness settings.

The machine is delivered with the
display brightness on setting 5.

This will change as soon as a different
setting is chosen.

Contrast

There are ten different display
contrast settings.

The machine is delivered with the
display contrast on setting 5.

This will change as soon as a different
setting is chosen.

Settings menu

Summary of Contents for W 2839I WPM

















































































Search results

Summary of Contents for W 2839I WPM

Reviews:

Related manuals for W 2839I WPM

Brands by name

Popular brands

Miele W 2839I WPM, Operating Instructions Manual

Search results

Summary of Contents for W 2839I WPM

Reviews:

Related manuals for W 2839I WPM

Brands by name

Popular brands