With the help of the following notes, minor faults in the performance of the
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
Possible cause
Remedy
The display remains
dark and the indicator
lights for the
programme buttons
are not lit up.
There is no power to
the machine.
Check whether
– the mains plug is plugged
in and switched on.
– the fuse or circuit breaker
has tripped.
You are asked to enter
a code.
Access via a code has
been activated.
Enter the code and confirm
the entry. Deactivate the
code if you do not wish this
message to appear in the
display the next time the
machine is switched on.
The display is dark.
The display has
switched off
automatically to save
energy (Standby
mode).
Press a button. Standby
comes to an end.
Problem solving guide
42
Summary of Contents for W 2839I WPM
Page 78: ...78 ...
Page 79: ...79 ...
Page 80: ...Alteration rights reserved 0710 W 2839i WPM M Nr 07 590 880 01 ...