Miele W 2839I WPM Operating Instructions Manual Download Page 60

Page: 60 / 80

Fitting the front panel

The machine front can be fitted with a
door panel to match other kitchen units.

If fitted in a Miele kitchen, the door
panel can be ordered pre-drilled with
the necessary fixing holes as an
optional accessory.

If fitted in a non-Miele kitchen, a
suitable panel will have to be drilled
to suit by a qualified kitchen fitter.
See "Fitting a door front panel made
by another manufacturer" for details
on preparing and drilling the fixing
holes.

Front panel dimensions

Width: 592 - 596 mm

Thickness: 17 to 19 mm (corresponding
to the thickness of the adjacent unit
door front panels)

Height: The height of the door front
panel corresponds to the door height
(

) of the adjacent units.

Fitting the front panel

Open the door.

Hold the front panel in the correct
position in front of the machine door.

Screw the front panel to the machine
door.

If all the spacer bars have been
removed:

You can also make use of the 3 holes at
the top of the door plate to screw the
front panel to the door plate.

Installation and connection

Summary of Contents for W 2839I WPM

















































































Search results

Summary of Contents for W 2839I WPM

Reviews:

Related manuals for W 2839I WPM

Brands by name

Popular brands

Miele W 2839I WPM, Operating Instructions Manual

Search results

Summary of Contents for W 2839I WPM

Reviews:

Related manuals for W 2839I WPM

Brands by name

Popular brands