Miele W 2104 Operating Instructions Manual Download Page 25

Page: 25 / 64

Interrupting a programme

Switch the washing machine off with
the

I-On/0-Off

button.

To continue with the same programme:

Switch the washing machine back on
again with the

I-On/0-Off

button.

Altering a programme once
selected

The machine will accept the following
changes after a programme has
started:

– at any time after the start, the spin

speed can be changed within the
limits for the programme.

– up to 6 minutes after the start of a

programme it is possible to change
the temperature selected for that
programme.

After the start of a programme it is no
longer possible to select a different
programme.

If the programme selector is moved, the
indicator light

Anti-crease/Finish

will

start flashing. However, the programme
sequence remains unaffected. The
indicator light will go out again when
the programme selector is moved back
to the programme previously chosen.

Skipping a programme stage

Turn the programme selector to

Finish

As soon as the programme sequence
indicator light for the programme stage
you want the programme to continue at
starts flashing:

Turn the programme selector back
again to the appropriate programme
within 4 seconds.

To cancel or select a different
programme

Switch the washing machine off with
the

I-On/0-Off

button.

Turn the programme selector to

Finish

The programme has now been
cancelled.

Switch the washing machine back on
with the

I-On/0-Off

button.

Select a different programme.

Press the

Start

button.

How to wash correctly

Summary of Contents for W 2104

































































Search results

Summary of Contents for W 2104

Reviews:

Related manuals for W 2104

Brands by name

Popular brands

Miele W 2104, Operating Instructions Manual

Search results

Summary of Contents for W 2104

Reviews:

Related manuals for W 2104

Brands by name

Popular brands