Notes on water drainage
The water drainage hose can be connected to:
- An on-wall or in-wall odour trap with a fixed hose connection
or
-The appliance connection for the odour trap.
To ensure that the waste water is pumped away completely,
the mains drainage outlet point should not be positioned
higher than the drain hose outlet position on the appliance.
The temperature of the water being drained is approx. 70 °C.
Important:
The top end of the drain hose must not be higher than 500
mm where it connects to the odour trap.
The stainless steel drain hose supplied with the appliance
must not be shortened.
If necessary, a drain hose measuring 7500 mm (7.5 m) is
available, but must not be shortened either.
Only original Miele hoses should be used.
The total hose length must not exceed 7500 mm (7.5 m).
Connecting the drain hose
^
Connect the drain hose to the odour trap using the hose
connector (
C
21 mm).
^
Secure the hose using a hose clip.
Plumbing in the appliance
178
Summary of Contents for TX3587
Page 18: ...Front view Description of the appliance 18 ...
Page 184: ...184 ...
Page 185: ...185 ...
Page 186: ...186 ...