Miele Touchtronic W 1119 Operating Instructions Manual Download Page 50

Page: 50 / 60

Shortening the door panel

The door panel can be shortened to
match the height of the adjacent
cabinetry.

The measure

equals the space from

the bottom of the washer door to the
bottom of the adjacent cabinet.

Cut the bottom of the door panel with
a jigsaw according to

Cut the side decor bars with a
hacksaw.

Installation

Open the door.

To remove the door panel unscrew
the 10 screws (arrows) from the door
sheet panel.

Remove the three decor bars from
the door panel by removing the
screws.

Cut the bottom of the

door panel

and

the two

side decor bars

Drill four holes into the door panel to
fix the lower decor bar.

Install the decor bars and the door
panel.

To install a decor panel, check if it
also needs to shortened.

Installation

Summary of Contents for Touchtronic W 1119





























































Search results

Summary of Contents for Touchtronic W 1119

Reviews:

Related manuals for Touchtronic W 1119

Brands by name

Popular brands

Miele Touchtronic W 1119, Operating Instructions Manual

Search results

Summary of Contents for Touchtronic W 1119

Reviews:

Related manuals for Touchtronic W 1119

Brands by name

Popular brands